This article helps you figure out problems like "Cannot import Blu-ray and DVD movies to Wii" and "Wonder how to play Blu-rays and DVDs on Nintendo Wii console" with a professional Wii utility called Pavtube Blu-ray DVD to Wii Ripper for Mac. The program is capable of ripping both Blu-ray discs and standard DVDs to a format that is compatible with Wii console, such as Wii MOV and Wii AVI. With full supports for BD and DVDs, it is good at cracking AACS and BD+ copy protection from a Blu-ray disc, and CSS encryption from general DVDs. Best of all, it offers super high conversion speed and excellent output file quality, which keep you far away from audio/video out of sync issues and image artifacts. Go to find a detailed guide about how to rip Blu-ray and DVD to Wii on Mac from the following contents.



Step-by-step guide: How to rip Blu-ray and DVD to Wii on Mac?



Step 1: Run Pavtube Blu-ray DVD to Wii Ripper for Mac, install and launch it.

Once run it, you can click "BD/DVD Folder" to load Blu-ray and DVD movie files. Please notice that "IFO File" icon only enables you to import standard DVD files, not BD movie files.







Step 2: Select output format for Wii console

Click on the pull down menu at the opposite side of "Format", and then hit "Wii" preset, afterwards you will see the interface as below. All the formats optimized for Wii are listed out. You can rip Blu-ray and DVD to Wii MOV, or rip Blu-ray and DVD to Wii AVI, or extract movies audios to Wii M4A or Wii MP3.







Step 3: Adjust video and audio parameters

Click "Settings" button, then the following window will pop up, on which you are allowed to adjust audio and video settings to optimize file quality for your Wii console. These adjustable settings include codec name, aspect ratio, bit rate, frame rate, sample rate, and audio channel.







Step 4: Get ready to rip Blu-ray and DVD to Wii on Mac

Click the big button "Convert" to rip Blu-ray and DVD to Wii with Pavtube Blu-ray DVD to Wii Ripper for Mac. Once the ripping work is finished, you can click "Open" button to get the resulted files with ease.



Additional info:

How to select your desired subtitle and audio track when rip Blu-ray and DVD to Wii on Mac?



1. Select subtitle

Click the drop-down list of "Subtitle", then all the subtitle info in the Blu-ray will be shown clearly, including language and stream ID, so you can select your needed language as your subtitle.







In addition, Pavtube Blu-ray DVD to Wii Ripper for Mac also offers an option called "Force Subtitle". When you check "Force Subtitle", you will see subtitles only when actors are speaking another language that is not your mother tongue. For instance, if you specify English (your mother tongue) as your subtitle, and meanwhile tick off "Force Subtitle" option, then when actors are speaking English, no subtitles will show up, but when they are talking with each other in French, the English subtitle will appear accompanying with the French.







2: Select audio track

Click the pull down menu of "Audio", and then the list will give you the detailed information of audio tracks, including language, audio codec, stream ID and audio channel. TrueHD audio and DTS-Master Audio are both supported.







Source: How to rip Blu-ray and DVD to Wii on Mac?

With the release of new iPhone 4 , some are upgrading to the new phone and some who aren't.The advertising point of the new iPhone 4 are the video recording, faster and longer battery life.With better performance and improved graphics, you can enjoy good quality DVD movie on iPhone 4 widescreen. Do you know how to enjoy DVD movie on iPhone 4 ? Here is the guide for you to keep video quality when converting DVD to iPhone 4.






Part I. Convert DVD to iPhone 4



Step 1. Download and install Pavtube DVD to iPhone 4 Converter, and run it.





Step 2. Add DVD movie by clicking "DVD Rom", "DVD Folder", or "IFO File" according to your preferences. "DVD Rom" is the most convenient way to load the all the chapters of a DVD.



Step 3. Specify output file. Make sure that the output format is iPhone 4 Movie or iPhone 4 Video if you want to watch on iPhone 4 , or choose MP3 if you want to extract the audio only. You can also set the output folder by clicking the browse button on "Output".



Step 4. Click "Convert" to get DVD movie into iPhone 4 file format. The conversion begins, and you just need to wait for a while.



Part II. Keep better quality with advanced settings.



Click "Settings" button beside the "Format", and you will face a pop-up window to change bitrate, video size, frame rate, audio bitrate, sample rate, etc. A higher bitrate will provide better video quality, but it will also larger the file size. If you don't mind about the file size, just choose the highest one. Otherwise, keep testing to find the best one for you with the quality and size.



The converter also includes other editing options for you to get the video to your preferences.

Adjust video – You can change video effects like brightness, contrast, etc. to make the video better for you to watch on iPhone 4 .

Trim video - If you just want to enjoy specific episode of the DVD movie on iPhone 4 , click Edit > Trim to cut off the unwanted part.

Crop video - You can cut the black boards or unwanted board from the image. The converter offers aspect ratio for you, so that you can make it consistent with the iPhone 4 screen. Otherwise, iPhone 4 will automatically display the video.



Part III. Transfer video to iPhone 4 with iTunes.



Step 1. Run iTunes and add the output video to iTunes library.

Step 2. Connect iPhone 4 with your computer

Step 3. Click File > Sync iPhone 4 in iTunes.

Your DVD video is ready on iPhone 4 then. It is so easy to enjoy the favorite DVD movie on iPhone 4 .



If you are using Mac OS, this popular DVD to iPhone 4 Converter for Mac is the right one for you.

Samsung SP-H03 Pico Projectors have been available through Samsung authorized retailers since June 2010. The palm-sized Pico Projector comes with a clean, crisp, and high resolution LED output and 1 GB of internal memory with the ability to add external memory up to 16 GB using its microSD slot. Apart from this, you can also hook up it with all of your multimedia devices that have a Composite, USB, and PC port. For instance, you are able to connect your iPhone to it by using a component to RGB adapter sold separately. Best of all, Samsung’s built-in Document and Media Viewers enable users to do computer-free projections of Microsoft Office documents, like PowerPoint, Excel, and Word, Adobe PDF, common video, image, and audio files in their native file formats. For its portability, convenience, bright HD features and multimedia playback functionality, it’s absolutely an ideal gadget to watch movies when you travel. In the purpose of helping you guys experience your beloved Blu-ray movies like Avatar with Samsung SP-H03 Pico Projector, this article elaborates a solution on how to rip Blu-ray to Samsung SP-H03 Pico Projector for playback. Just feel free to check it.



Required software:

Pavtube Blu-Ray Ripper



Before we start, you can have a look at the native file formats supported by Samsung SP-H03 Pico Projector:

Movie: AVI, MP4, ASF, MPG, RM, FLV, WMV

Image: JPEG, PNG, BMP, GIF

Music: MP3, MP2, WAV, WMA, FLAC, APE, RA



Here we go.

Step-by-step guide:

How to rip Blu-ray to Samsung SP-H03 Pico Projector for playback?



Step 1: Free download Pavtube blu-ray converter, install and launch it

Launch Pavtube blu-ray converter to rip Blu-ray to Samsung SP-H03 Pico Projector. Once run this blu-ray ripper, you can click "BD/DVD ROM" or "BD/DVD Folder" to load Blu-ray movie files. All titles are checked by default when you load them. If you just want to rip the main movie, you can right click on the file marked with "Main Title" to "Uncheck All", and then only tick off "Main Title".







Step 2: Choose your wanted subtitle and audio track

This Blu-ray ripper is capable of reading all subtitles and audio tracks in a BD disc, including Dolby TureHD Audio and DTS-HD Master Audio, which enables you to select whatever subtitles and audio tracks in the source movie, no matter your mother tongue or other foreign languages. Before start ripping Blu-ray to Samsung SP-H03, you need click on the drop down list of "Subtitle" and "Audio" respectively to choose your wanted languages from the list to convert.



Step 3: Select iPhone 4 720p as output format for Samsung SP-H03 Pico Projector

Click on the pull down menu of "Format", and then follow "iPhone" > "iPhone 4 H.264 720P (*.mp4)".







Tips:

We have tested using Pavtube Blu-Ray Ripper to convert Avatar to the new iPhone 4 at 720P, the result picture quality is not only spellbinding when run on iPhone 4, but also with Samsung SP-H03 Pico Projector from a microSD card in the unit. Click "Settings" button, you will see the default settings used by this Blu-ray converter clearly. Actually, all the parameters on the following window are changeable, and you can try your luck to adjust them. But if you are not good at it, you’d better let them be, because incorrect adjustments may cause audio/video out of sync issues or artifacts on your video.







Step 4: Start ripping Blu-ray to Samsung SP-H03

Click the big button "Convert" to start ripping Blu-ray to Samsung SP-H03. The Blu-ray ripper is able to guarantee audio and video in sync quality with fast conversion speed. Once conversion is done, you can get the final movie files for your Samsung SP-H03 Pico Projector by clicking "Open" button with ease. Hope you enjoy your movie-watching experience with this micro projector.

This article helps you work out issues like “Cannot import AVCHD Lite from Lumix” and “Wonder how to play the AVCHD Lite contents” with Pavtube HD Video Converter, a professional high-definition video converter that converts AVCHD MTS videos as well as HD videos of other various formats to editable and playable video and audio formats.



How to play AVCHD Lite?







AVCHD Lite is a subset of AVCHD format, which was brought up by Panasonic in Jan 2009, with the release of Lumix DMC-FS7, DMC-LS85 and DMC-FS15, which are capable of 720p/30fps recording. The AVCHD Lite is an essential AVCHD format, saving files in *.mts onto SD/SDHC/SDXC card. Users of Lumix cameras may insert the card into the VIERA Image Viewer (SD/SDHC/SDXC card slot) on a VIERA TV or DIGA Blu-ray Disc? Player to enjoy the AVCHD Lite contents on wide screen TV. In order to play MTS file on PC, Mplayer and VLC player are your first choice. If you insist playing Lumix AVCHD Lite contents in Windows Media Player, would like to transfer the AVCHD Lite video to iPhone 4, iPad, iPod, PSP, Zune etc for playback, or feel like enjoying the AVCHD Lite videos on HDTV via media players, MTS Converter is a must. In order to play the AVCHD Lite video files generated by the Panasonic Lumix cameras more freely, you can convert AVCHD to MP4, for MP4 is widely supported by portable media players, devices and video game consoles.



How to convert the Panasonic AVCHD Lite video to MP4 for playing back?

In order to convert the AVCHD Lite video files generated by the Panasonic Lumix DMC-FT1 to MP4, you need Pavtube HD Video Converter. Using this powerful AVCHD video converter, you can convert AVCHD from camcorder to various video and audio formats. A free trial version is available, only watermark of Pavtube logo will appear on the screen of converted videos. You may refer to below guide of how to convert the AVCHD Lite to MP4 with Pavtube HD Video Converter.



Step 1.Load AVCHD Lite video to Pavtube HD Video Converter.

Once you run it, click “Add” to load the source AVCHD Lite MTS files. When the files are loaded into the program, you could view file information such as codec, bitrate,frame rate,etc in the preview window.







Step 2.Select output format for converting AVCHD to MP4

Click on “Format”, and select output format from the drop-down list. H.264/AVC and MPEG-4 encoded MP4 formats are available. If you would like to play the AVCHD Lite recordings on portable players like iPad, iPhone 4,iPod,PSP,Archos,Zune,PocketPC,etc,simply follow the corresponding profile group and select customized MP4 format. In each group there is a star format, which is optimized format.







If you would like to watch the AVCHD Lite contents on HDTV via media players (e.g. Western Digital Media Player, Video DVD combos), HD quality should be attained. To maintain HD video quality, you may follow “HD Video” -> “H.264 HD Video” (*.mp4) or “MPEG-4 HD Video (*.mp4) and customize the A/V parameters based on the the media player and your TV.



Step 3. Customize MP4 format for your player.

Click "Settings" button to adjust video and audio parameters. Notice that you can not “convert up” video quality. If you selected HD Video in Step 2, we advise you to adjust the A/V parameters to be the same with source AVCHD Lite footage so as to bear least quality loss at proper file size. You may check the A/V parameters of original video in preview panel, and it will display the video information when you select an item. In case it displays no information, please click the sign.







Step 4: Click "Convert" button to start converting AVCHD Lite to MP4 format.

After the above steps are done, you can click “Convert” button to start conversion. And you can click “Open” button to get the generated MP4 files for play back.







Tips:

1. Higher bitrate leads to higher video quality and bigger file size.


2. You may trim the video to desired length in Editor interface, just select the video you’d like to trim and click “Edit” menu.


3. To join MTS files together, simply select the files and check the box of “Merge into one file” before conversion starts.

Via: Pavtube Convert AVCHD Lite to MP4

MXF is a wrapper that packages video and audio content together, with metadata describing and managing content. MXF is now taken for granted by many companies and is the file format of choice for content exchange attributed to its fast data transfer. Camera-recorders manufactured by Panansonic are now adopting P2 card as media storage, and MXF is the video recording format. Users can transfer the MXF files to hard disk or other archiving system at fairly fast speed. Besides, low-rate MXF files can be transferred by FTP over the Internet for on-air broadcasting of news bulletins, program scheduling or off-line editing. However, backing up MXF footage brings troubles. The kind of video format features extremely high bit rate, which results in huge size files. Several hours of MXF recordings can takes up storage of hundreds of GB. Your hard disk will be soon filled up. That’s why we are talking about cutting the file size down by transferring P2 MXF to QuickTime MOV format with Pavtube Video Converter.



Now please refer to the following guide how to convert MXF to QuickTime MOV with Pavtube Video Converter.



Step 1. Import P2 MXF to the powerful MXF Converter.

Run the MXF to QuickTime MOV Video Converter, click “Add” button and browse to the MXF files you’d like to convert, click “Choose” to confirm. Or you may drag and drop the files to the MXF Converter.







When the MXF files are loaded to the program, you can view the videos from the Preview window. Simply select an item and click the “Play” button. When the video is playing, you may take snapshoot by clicking the “Snapshoot” button when it plays to your favorable frame.



Step 2. Select output format- QuickTime MOV, H.264 MOV.

The Pavtube MXF Converter is capable of converting unprotected MTS, MXF, M2T files to QuickTime MOV, MP4, MOV, M4V, QuickTime MOV and various other optimized formats for portable devices. Pavtube HD Video Converter provides QuickTime MOV formats with xvid and H.264 codec. Since we are converting MXF video to QuickTime MOV, ,what you need is to click on the “Format” bar, follow “Common Video” and select “QuickTime MOV” format in order to save storage. To get higher quality, please click on “HD Video” tab and choose “HD MOV” format.







Step 3. Set video and audio bit rate, frame rate, channels, etc.

You may also customize video and audio parameters in Settings panel. Simply click “Settings” button to and set the bitrate, frame rate, channels, sampling rate as desired values. What you are doing is down-scaling the file size, and the trick lies in video and audio bit rate. The video bit rate of P2 MXF can be up to 100mbps! That’s extremely high! What bit rate is best? It depends on your needs. The video bit rate of a commercial blu-ray disc is around 30mbps. And standard DVD? 5-10mbps. The lower bit rate you set the smaller file size you get. You’d better try with some smaller files first before transferring all MXF files to QuickTime MOV.







Step 4. Specify a folder to save the converted QuickTime MOV files.

Click the “Browse” button next to “Export to” field and specify an output folder to save converted files. Click “Choose” to confirm.







Step 5. Start converting MXF to QuickTime MOV.

Click “Convert” to start converting MXF to QuickTime MOV format when everything’s ready. The MXF Video Converter supports batch conversion so you may load multiple MXF files and convert them to QuickTime MOV at one time. You may also join MXF files together by checking the box “Merge into one file” before conversion starts. After conversion you may click “Open” button to find generated QuickTime MOV files and use them freely.